What does QNH mean in Transportation?
This page is about the meanings of the acronym/abbreviation/shorthand QNH in the Governmental field in general and in the Transportation terminology in particular.
What should I set on the sub-scale of my altimeter so that the instrument would indicate my elevation if I were on the ground at your station?
Find a translation for QNH in other languages:
Select another language:
What does QNH mean?
- QNH is one of the many Q codes. It is defined as, "barometric pressure adjusted to sea level." It is a pressure setting used by pilots, air traffic control, and low frequency weather beacons to refer to the barometric setting which, when set on an aircraft's altimeter, will cause the altimeter to read altitude above mean sea level within a certain defined region. Within United Kingdom airspace, these are known as Altimeter Setting Regions; these regions may be large areas, or apply only to the airfield for which the QNH was given. An airfield QNH will cause the altimeter to show airfield altitude, that is, the altitude of the centre point of the main runway above sea level on landing, irrespective of the temperature. In the United Kingdom the lowest forecast value of QNH for an altimeter setting region is called the "Regional Pressure Setting" and may be used to ensure safe terrain separation when cruising at lower altitudes. In some parts of the world a similar procedure is adopted and this is known as "Regional QNH" however this name has been modified to the above in the UK to avoid ambiguity.
Discuss this QNH abbreviation with the community:
Use the citation below to add this abbreviation to your bibliography:
QNH also stands for:
- NOAA Quasi- Non Hydrostatic Model
- Qatar National Hotels Company
- Quasi Non-Hydrostatic
- Your net frequency is High.
... see them all »
Nearby & related abbreviations:
- Search What should I set on the sub-scale of my altimeter so that the instrument would indicate my elevation if I were on the ground at your station? on Amazon.com
- Search What should I set on the sub-scale of my altimeter so that the instrument would indicate my elevation if I were on the ground at your station? on Google